What the 2027 rules cover
The topics and tasks the event can include, in brief. Topics marked State & national are left out at regionals.
- Teams of up to 2 build a device on-site to solve an engineering challenge in about 50 minutes; eye protection category B; impound required
Event parameters
- Eye protection must be worn during device setup and operation
- All materials come in one rectangular box with a lid, at most 32.0 × 26.0 × 47.0 cm outside (lid included), and the lid must close fully
- The material box and all materials are impounded
- Any material not prohibited by the challenge is allowed, except electronic components (no electricity in any challenge) and liquids
- Tape is the only adhesive: Scotch, masking or duct tape
- Every device must pass a safety inspection before it operates
- Tools are impounded in a separate container, used only for their intended function and never as device parts; no electronic tools
- The supervisor provides a measuring device, a timer and any equipment the task needs.
Competition parameters
- One challenge is announced after impound: Category 1 at Regionals, Category 2 at State, either at Nationals
- The device is built on-site using only the materials in the team's box
- Devices must be free-standing unless the challenge says otherwise
- At most 30 minutes to build; no changes after the build period unless the challenge allows; early finishers may be judged early
- The supervisor reviews the team's recorded data with them at the end of their event time.
- A team filing an appeal leaves its materials, device and box in the event area.
General scoring
- Each challenge's instructions give its scoring system and the tie-breakers for each tier.
- Four tiers: meets all requirements and accomplishes the challenge (1), meets them but fails (2), misses a requirement but succeeds (3), misses and fails (4)
- A team caught modifying its device after the build period is ranked one tier lower
Engineering challenges
- Category 1: measure the mass of an unknown Test Mass
- Build a device that accurately measures the mass of an unknown object
- Test Mass: up to 25 × 25 × 100 cm, 10.0–2000.0 g, supplied and revealed just before the build, untouched until the build ends; expected precision announced
- Prohibited: commercial scales or their parts, and commercial balance weights including pre-measured physics masses
- Two minutes to measure and write down the mass; for Tiers 1 and 3 show that the device really measures mass and explain its reading (no guessing or hefting)
- Tiers 1 and 3 score 5000 − |official mass − measured mass| in grams; Tiers 2 and 4 rank by device height in cm; ties by whole seconds left
- Category 2: sort five dollars of mixed coins
- Build a device that sorts five dollars of mixed coins into separate bins
- Quarters, dimes and nickels worth $5, same mix for all teams; one entry point (Coin Hopper); one minute; no touching once coins enter; bins labelled and removable
- Prohibited: commercial coin sorting machines or their parts
- No hand sorting first; Tiers 1 and 3 need at least one coin of each kind sorted; say "Stop" for bonus time; unsorted coins don't score; bins go to the supervisor
- Scored on total value sorted (cents), slot height (cm) and bonus seconds; Tiers 2 and 4 rank by device height; ties by slot height, then value, then bonus seconds
- Category 1: measure the mass of an unknown Test Mass
Paraphrased by SciPrep from the 2027 Science Olympiad Division C Rules Manual, pages C70–C72. The official rules are in the Rules Manual from Science Olympiad; when they differ, the manual and its clarifications win.