What the 2027 rules cover
The device, how it's run and how it's scored, in brief. Topics marked State & national are left out at regionals.
- Build event, no written test: teams of up to 2 build, test-fly, analyze and optimize free-flight rubber-powered airplanes before the tournament for maximum time aloft; about 15 minutes.
Event parameters
- Teams may bring up to 2 airplanes, a flight log, transport boxes, tools and equipment.
- Teams must bring at least one Measurement Box; it may double as the transport box.
- The Event Supervisor supplies the measuring tools and timers used for scoring.
Construction parameters
- Designs may come from plans, kits, the team or other sources; kits may not have pre-glued joints or pre-covered surfaces
- Any material except boron filaments may be used in the airplane and boxes.
- In flight configuration the airplane fits fully inside the team's lidless Measurement Box, whose outside fits within 32.0 × 24.0 × 47.0 cm
- Flight configuration: fully assembled; no change in chord, span, length or lifting area after unboxing or in flight; propellers may be rotated to fit; motor need not be on or wound
- The airplane without its rubber motor must have a mass of at least 8.0 g
- Propeller assemblies may be built or bought pre-assembled; propellers that actively change diameter or blade angle (variable pitch) are not allowed
- All lift must come from the wing(s)
- The only power is rubber motor(s) that stay attached to the airplane for the whole flight
- A motor or motor set, including attachments such as O-rings, has a mass of at most 1.5 g
- Motors for a multi-motor airplane are massed together as a set and can't be swapped between sets.
- Motors are massed separately from the airplane and may be lubricated before or after check-in.
- Up to 6 motors (or motor sets) may be checked in.
- Answer questions about the airplane's design, construction and operation (per the Building Policy)
The competition
- Before the tournament, the indoor site's approximate length, width and ceiling height, and factors such as air currents, are announced
- Day of the tournament
- The supervisor decides on simultaneous official flights and practice flights; no practice flights in the final half-hour of the last period.
- Inside the competition area there is no outside help, materials or communication, and only participants handle the airplane; violators rank below all other teams.
- An optional self-check station may let teams check boxes and airplanes and make changes before check-in.
- Check-in: airplane in its box and flight log are inspected; box size and fit checked; airplane massed (team ballast allowed); motors are collected until the Flight Period
- The Flight Period
- The 10-minute Flight Period starts when the motors are returned; a flight launched within it may fly to completion
- Adjustments, repairs and trim flights are allowed during the Flight Period.
- No extra time is given to recover or repair an airplane.
- Before each launch, tell the timers whether the flight is official or trim; an undeclared flight counts as official
- Up to 2 official flights in total, using 1 or 2 airplanes
- Time aloft runs from release until the airplane touches the floor, stops being supported by its lifting surfaces (e.g. lands on a girder) or the supervisor ends the flight
- Three timers are encouraged; the median of their times, to the device's precision, is the official time aloft
- Participants must not steer the airplane during a flight.
- Launch by hand while standing on the floor; no artificial aids to gain launch height.
- After a collision with another airplane a team may choose a re-flight, outside the 10-minute Flight Period.
- On request, teams show each airplane still fits its box in flight configuration; the supervisor may recheck the mass.
- The supervisor reviews each team's recorded data with them at the end of their event time.
Flight logs
- A log for the bonus has 6 or more parameters (3 required, 3 or more chosen) for 10 or more test flights before the competition
- Required parameters: motor size before wind-up, turns or torque at launch, and flight time
- At least 3 more parameters chosen by the team, such as turns left at landing, peak altitude, landing torque or propeller pitch
- All numeric data carry units (column headers are fine); torque may be in arbitrary units from an uncalibrated meter
- A log for the bonus has 6 or more parameters (3 required, 3 or more chosen) for 10 or more test flights before the competition
Scoring (high score wins)
- The final score is the larger of the team's official Flight Scores
- Flight Score = flight time (s) × the flight log bonus multiplier
- Bonus multiplier: × 1.2 for a complete flight log, × 1.1 for a partial one, × 1.0 for none
- Breaking a construction or competition rule that has no specific penalty ranks the team after all teams without violations
- Ties are broken by the longer non-scored official Flight Score
Definitions
- Airplane: a heavier-than-air device held up by wings that make lift while a propeller drives it through the air.
- Wing: a surface that makes lift from air flowing across it.
- Propeller: a hub with one or more (usually two) angled or twisted blades that turns the motor's rotation into thrust.
- Steering: using anything (balloons, poles, air, hands…) to control the airplane's direction after release.
- Ballast: material such as clay or tape added for stability, balance or control.
Paraphrased by SciPrep from the 2027 Science Olympiad Division C Rules Manual, pages C62–C64. The official rules are in the Rules Manual from Science Olympiad; when they differ, the manual and its clarifications win.